demountable container, storage, container with bunded floor, container made of galvanized steel,

Container Features

demountable container, storage, container with bunded floor, container made of galvanized steel

Container description

Eurospace demountable containers are supplied in four sizes and consist of following parts:

Floor –  wooden planks 35 mm thick bolted to galvanized steel supports of  galvanized steel 2 mm thick. Sides of the floor are fixed to horizontal steel supports, which are made out of galvanized steel 1 mm thick. Floor can be also made of hot galvanized steel.

Side Wall – corrugated galvanized steel 0,75 mm thick. Corrugated steel is riveted to steel supports, which are made out of galvanized steel 2 mm thick.  Extension of side wall is made out of corrugated galvanized steel 0,75 mm thick. Corrugated steel is riveted to steel supports, which are made out of galvanized steel 2 mm thick. On extension are bolted red connections made out of steel sheet 3 mm thick, galvanized and than powder coated.

Back Wall – corrugated galvanized steel 0,75 mm thick. Corrugated steel is riveted to two steel supports (top & bottom), which are made out of galvanized steel 2 mm thick.

Roof – corrugated galvanized steel 0,75 mm thick. This corrugated steel roofing is riveted to steel supports, which are made out of galvanized steel 2 mm thick. Side supports of the roof serve as gutters.

Double-wing Door – 0,75 mm corrugated galvanized steel. These are riveted to steel supports of the door. Frames are made out of 1 mm thick galvanized steel. The door is secured by a pull draw lever, door handle, lock with plug and prevention against buckling. The door wings are attached to the frame with hinges. The frame is constructed of 2 mm thick galvanized steel supports. To each door wing is delivered separately door stopper 400 mm long.  Corner Angle is made out of 3 mm thick steel. It is galvanized and than powder coated. The corner angles are used to join parts of container (floor, side walls, extensions of side wall, roof) to transport position and for own assembly. Two outside corner angles are provided with pegs which are used for stacking containers in transport position.

Snow loading for the roof  – is 100 kg/m2.
Use of the roof stiffening set would increase the snow loading to 300 kg/m2.